Natural Plant Tonic • Rooting Aid • Soil & Microbial Biostimulant
Our 200:1 Freeze-Dried Aloe Vera Powder is the most concentrated, bioactive form of aloe available for serious growers. Made from hand-harvested Aloe barbadensis miller leaves — inner fillet only, from certified organic source material, freeze-dried at peak maturity (3–4 years) — this ultra-soluble, filler-free powder preserves the full spectrum of plant-active compounds that make aloe one of the most versatile inputs in any grow operation.
Used as a foliar spray, aloe supports natural plant vigor, leaf vitality, and recovery from heat, drought, and transplant stress. As a soil drench, it feeds the rhizosphere with prebiotic polysaccharides, amino acids, and trace minerals. As a cloning solution, it supports rapid root development. And as a seed soak, research suggests it can support germination performance and seedling vigor, particularly under cold, dry, or saline conditions.
One product. Multiple applications. 100% Pure, No fillers, no synthetics.
🔬 Why 200:1 Concentrate Matters
A single 28g pouch of our aloe powder is equivalent to approximately 5.6 litres of fresh inner-leaf aloe gel — the yield from roughly 30 mature aloe leaves. Freeze-drying preserves long-chain polysaccharides such as acemannan intact, which gives aloe much of its biological activity, so your reconstituted solution behaves like fresh-cut aloe straight from the leaf.
🧪 What's in the Powder
Aloe vera contains a wide spectrum of naturally occurring plant compounds. These are the ones most relevant for plant health applications:
Salicylic acid — A naturally occurring plant hormone involved in the plant's own signalling pathways. Research describes salicylic acid as a key regulator of plant responses to environmental stress.
Acemannan and complex polysaccharides — A long-chain β-(1,4)-acetylated mannan that has been studied for its prebiotic activity, meaning it can serve as a food source for beneficial microorganisms in soil and growing media, including Bacillus, Trichoderma, Pseudomonas, and mycorrhizal fungi.
Saponins — Naturally occurring triterpenoid surfactants. Saponins reduce water's surface tension, helping foliar sprays sheet evenly across waxy leaf surfaces and helping water penetrate dry, hydrophobic soils.
Plant growth signals — Aloe contains naturally occurring auxin-like compounds, gibberellin-like activity, and cytokinin activity that support cell division, root initiation, and shoot extension, particularly during propagation and early seedling stages.
Amino acids, enzymes, vitamins, and trace minerals — 20 of the 22 essential amino acids, eight active enzymes (including bradykinase, lipase, and amylase), vitamins B1, B2, B6, C, E, and folate, plus calcium, magnesium, zinc, and other trace minerals.
🌱 Key Benefits
🌱 Supports Root Development - Naturally occurring auxin and gibberellin-like activity and amino acids support root initiation, cell division, and early growth in cuttings, seedlings, and transplants.
🛡️ Supports Plant Vigor & Stress Tolerance - Salicylic acid and other bioactive compounds support the plant's natural responses to environmental stressors, including heat, drought, and transplant shock.
🌿 Feeds the Soil Food Web - Acemannan and complex polysaccharides function as prebiotics, supporting populations of beneficial microorganisms, including Bacillus, Trichoderma, Pseudomonas, and mycorrhizal fungi.
💧 Buffers Environmental Stress - Supports plant recovery from transplant shock, drought, heat, cold, and high-light or salt conditions. Supports water-use efficiency and stomatal regulation.
💦 Improves Spray Coverage - Natural saponins reduce water surface tension, helping foliar sprays adhere to leaves and helping root drenches penetrate dry or compacted soil.
🧬 Bioavailable Nutritional Support - Provides 20 amino acids, eight active enzymes, B-complex vitamins, vitamin C, and naturally chelated trace minerals — absorbed through both leaves and roots.
🌾 Supports Seed and Seedling Vigor - Research has shown that aloe-based seed soaks can support germination performance, particularly under stress conditions.
🌾 Excellent For
-
Cuttings, clones, and air-layering
-
Seed soaking and pre-germination treatments
-
Indoor and outdoor crops, vegetable gardens and raised beds
-
Fruit trees, berries, and orchard systems, vineyards, and cane fruit
-
Regenerative farms and living soil systems
-
Greenhouses, nurseries, and propagation houses
-
Cannabis (vegetative through early flower)
🔧 Application Rates
🌿 Foliar Spray (Plant Tonic)
Coats leaves and stems with salicylic acid, saponins, and amino acids. Best used preventively as part of a regular plant-care rotation rather than as a one-time rescue treatment.
Rate: Up to 1 tsp (5 ml) per 1 gallon (3.78 L) of non-chlorinated water.
Apply during early morning, late evening, or when grow lights are off or dimmed. Coat the entire plant — tops and undersides of leaves, stems, and surrounding foliage — to the point of slight runoff.
💧 Soil Drench (Rhizosphere Biostimulant)
Feeds the root zone with prebiotic polysaccharides, organic acids, and chelated trace minerals. Excellent after transplanting, during heat events, or as part of a regular feeding rotation.
Rate: ½ tsp (2.5 ml) per 1 gallon (3.78 L). Apply to the root zone every 2 to 4 weeks during the active growing season.
✂️ Cloning & Cutting Soak
Naturally occurring rooting cofactors and polysaccharides support callus formation and cell division at the cut site.
Rate: ½ tsp (2.5 ml) per 1 gallon (3.78 L). Soak cuttings for 6 to 12 hours before placing them into cloning media.
Pair with Liquid Kelp and Fulvic Acid for amplified support on harder-to-root species.
🌾 Seed Soak
Research on several crops has shown that aloe-based seed soaks can support germination and seedling vigor — particularly when sowing into cold, dry, or saline soil.
Rate: ¼ tsp (1.25 ml) per 1 gallon (3.78 L). Soak seeds 6 to 12 hours before sowing.
🌱 Transplant Recovery Drench
Supports plant recovery from transplant stress; polysaccharides feed the new root zone microbiome from day one.
Rate: ½ tsp (2.5 ml) per 1 gallon (3.78 L), applied as a root-zone drench at planting and again 5 to 7 days later.
🧬 Microbial Inoculant Carrier
The polysaccharide matrix supports the survival and establishment of Trichoderma, Bacillus, and mycorrhizal propagules during application.
Rate: ½ tsp (2.5 ml) per 1 gallon (3.78 L), tank-mixed with your inoculant of choice — such as our Activated Beneficial Microbes (ABM).
🔄 Tank-Mix Recipes
Aloe Vera Powder combines naturally with our other plant amendments. Fill a pump sprayer with clean, non-chlorinated water, add each ingredient at its recommended rate, and stir gently — saponins foam if agitated too aggressively. All rates per 1 gallon (3.78 L) of water.
🛡️ Foundation Foliar (Every 7–14 days)
-
1 tsp Aloe Vera Powder
-
1 tbsp Liquid Kelp
-
½ tsp Fulvic Acid
🌡️ Heat & Drought Recovery Spray
-
1 tsp Aloe Vera Powder
-
1 tbsp Liquid Kelp
-
1 tsp Yucca Extract
🌱 Transplant Recovery Drench
-
½ tsp Aloe Vera Powder
-
1 tbsp Liquid Kelp
-
1 tsp Fish Hydrolysate
🧫 Microbial Inoculation Drench
-
½ tsp Aloe Vera Powder
-
ABM at label rate
-
1 tsp Fulvic Acid
📦 Storage Instructions
-
Store sealed in a cool, dry place
-
Avoid exposure to moisture — powder is hygroscopic and will clump if not kept dry
-
Reseal immediately after each use
-
Shelf-stable for 24+ months when stored properly
This product complies with Canada’s Organic Production Systems General Principles & Management Standards and Permitted Substances Lists (CAN/CGSB-32.310-2026 CAN/CGSB-32.311-2026)
Food Grade: This product arrives to you in it's original sealed pouch straight from production, the powder is never opened or repackaged in our facility, so it reaches you exactly as it was sealed. The material is produced to food-grade standards.
